A water heater is a device used to transfer heat from the outside to the inside of your home. The water heater is built in an older house or built before 1977, but it’s still important to have a water heater tune-up performed once every six months. This is to ensure the device functions correctly and keeps your water hot for the longest time possible. It is also important for safety reasons. While there are no health risks associated with having your water heater tune-up done, it reduces the unit’s life.
When should you perform a water heater tune-up? Water heaters should be checked annually for problems or wear and tear. If you find problems or wear and tear on your water heater, they should be repaired or replaced as soon as possible. That way, you won’t have to pay high heating costs again.
When should you perform a water heater tune-up? The best time to perform this service is when the water heater is not operating. For example, if the pilot light has gone out but the tank is still filling, you can perform a water heater tune-up. However, if you’re using your heater to warm water for someone else, such as the person who fills the water tank, it’s probably a good idea to wait until the tank is full. Waiting too long can make the heater work harder than it should, causing it to break down more often.
What do you need to do to perform a water heater tune-up? You need to locate the pilot light for your heater. It’s usually located near the tank. Once you’ve located the light, turn it on. Look for an indicator that says something about a low battery. This is a sign that the water heater requires a battery replacement.
Next, remove the pilot light and place it in a testing tube. Put some water in the testing tube, then watch what happens. If the indicator changes color from green to red, this means that you will have to replace the water heater’s battery. However, keep in mind that different water heaters will react differently to having water in the tank. This may mean you have to try a few different types of water heaters.
After you replace the battery, recheck the indicator and see if it’s showing an “L.” This means that your heater’s level of efficiency has been increased. Finally, connect the new battery to the water heater. Perform a few final checks to ensure everything was working properly before reconnecting the heater to the water source.
As a general rule, you should perform the water heater tune-up when the hot water meter reaches its highest reading. For most homes, this occurs during the summer months, but it can occur any time. If your hot water meter is often low, such as when you are taking a shower, this could also be an indication that your water heater needs a battery change. If this is the case, then you should turn the power off and wait for the water to come back on its own. It’s much better to spend a few minutes checking for leaks than to schedule a trip to the repair shop later.
With the new water heater, now it’s time to check the tank. To do this, open the tank valve using a wrench. Check for any leaks. You can plug some leaks in using a wrench, but you may need to use a pair of tank cleaning tools if the leak is deeper or larger. If you find a water leak, you should try to repair the leak before replacing the tank because it is more difficult to correct an existing water leak than repair the tank after it has been leaking if you can’t locate the problem. It’s always wise to contact professionals.